Trane Furnace E6.3 Error Code
What the E6.3 code means
On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E6.3 means an igniter fault — the igniter relay has failed or the igniter is open.
Likely causes
- Burned-out or cracked hot surface igniter
- Failed igniter relay on the control board
- Loose igniter connector
How to fix it — step by step
- Confirm the thermostat is calling for heat
- Reset power once and listen for the start sequence (inducer, then ignition attempt)
- If there is no ignition and the code returns, stop resetting
- Call a technician to test igniter resistance and replace the igniter or board
Parts that commonly fix the E6.3 code
- hot surface igniter - Shop at RepairClinic
- control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.