Roborock Robot vacuum Error 21

What this problem usually means

Vertical bumper pressed. The vertical bumper / laser rangefinder bumper at the front of the LiDAR area is pressed in and cannot release.

Likely causes

  1. Robot wedged against a wall or furniture pressing the vertical bumper
  2. Debris holding the vertical bumper in
  3. Object resting against the front sensor housing

How to fix it — step by step

  1. Move the robot away from the wall or object pressing on it
  2. Check the vertical bumper and clear any debris around it
  3. Press and release it to check it moves freely
  4. Move the robot to an open area and retry

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →