Roborock Robot vacuum Error 4

What this problem usually means

Cliff sensor error. The drop sensors on the underside are dirty or are reading a drop, so the robot will not move for safety.

Likely causes

  1. Cliff sensors dirty or dusty
  2. Robot placed too close to stairs or a drop
  3. Dark flooring confusing the cliff sensors

How to fix it — step by step

  1. Wipe all the cliff sensors on the underside with a clean, dry cloth
  2. Move the robot away from drops, stairs and edges
  3. Place it on level floor in the middle of the room
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →