Roborock Robot vacuum Error 24

What this problem usually means

Virtual no-go zone or wall detected (S5 Max / S6-era manuals; newer manuals list the same condition without a number). The robot started in, or ran into, a no-go zone, Invisible Wall or barrier tape area.

Likely causes

  1. Robot placed inside an app no-go zone or Invisible Wall area
  2. Robot too close to magnetic barrier tape
  3. Map no-go zone covering the starting position

How to fix it — step by step

  1. Move the robot out of the no-go zone and away from any barrier tape
  2. Place it in an open, allowed area
  3. Check the map in the app if a no-go zone is covering where you want it to clean
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →