Roborock Robot vacuum Error 22

What this problem usually means

Dock locator error (Q5+ / S7-era manuals: 'Clean and retry'). On S5 Max-era models the same number is listed differently, as 'wipe the recharge sensor', so check your own manual. The robot is having trouble locating / reading the dock.

Likely causes

  1. Dock locator / recharge sensor window dirty
  2. Dock location beacon blocked or dock moved
  3. Bright light or obstacles interfering with the dock signal

How to fix it — step by step

  1. Wipe the dock locator / recharge sensor on the robot clean
  2. Clean the dock location beacon / signal area on the dock and make sure nothing blocks it
  3. Make sure the dock is flat against a wall with clear space in front of it
  4. Place the robot in front of the dock and retry

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →