Roborock Robot vacuum Error 6

What this problem usually means

Side brush jammed. The side brush cannot spin freely.

Likely causes

  1. Hair or string wrapped around the side brush or its shaft
  2. Side brush bent, damaged or not fitted correctly
  3. Debris lodged under the side brush

How to fix it — step by step

  1. Turn the robot off and turn it over
  2. Remove the side brush and clean hair and debris from it and from its shaft
  3. Refit the side brush so it clicks / screws back in place
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →