Roborock Robot vacuum Error 5

What this problem usually means

Main brush jammed. The main brush cannot turn freely, usually because hair or debris is wrapped around it or its bearings.

Likely causes

  1. Hair, string or carpet fibres wrapped around the main brush
  2. Debris jammed in the main brush bearings or end caps
  3. Object stuck in the brush housing

How to fix it — step by step

  1. Turn the robot off and turn it over
  2. Remove the main brush and pull hair and debris off it and off both bearings / end caps
  3. Clear anything stuck in the brush housing, then refit the brush and cover
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →