Roborock Robot vacuum Error 18

What this problem usually means

Fan error (called vacuum fan error on S5 Max / S6-era models). The suction fan is reporting a fault and the manual's fix is to reset the system.

Likely causes

  1. Blockage restricting the fan / airflow, such as a full dustbin or clogged filter
  2. Temporary fan fault

How to fix it — step by step

  1. Empty the dustbin and clean the filter
  2. Check for and remove any blockage in the suction path
  3. Reset / restart the robot (a system reset)
  4. Retry cleaning, and contact Roborock support if the fan error returns straight away

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →