Roborock Robot vacuum Error 11
What this problem usually means
Strong / high-intensity magnetic field detected (earlier and E-series models). The robot is too close to a magnetic virtual wall / boundary tape when starting, so it will not start there.
Likely causes
- Robot starting right next to magnetic virtual-wall tape
- Strong magnetic source close to the starting position
How to fix it — step by step
- Move the robot well away from the virtual wall / magnetic tape
- Place it in an open area away from the boundary strip
- Restart cleaning from the new location
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.