Roborock Robot vacuum Error 15
What this problem usually means
Wall sensor dirty (S7 series and newer; the same fault is Error 26 on Q5+ and older models such as the S5 Max). The side wall sensor cannot read the wall correctly.
Likely causes
- Dust or dirt on the wall sensor window
- Sensor window smeared or scratched over with grime
How to fix it — step by step
- Find the wall sensor on the side of the robot
- Wipe the sensor window clean with a soft, dry cloth
- Move the robot to a new location
- Restart cleaning
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.