Roborock Robot vacuum Error 10
What this problem usually means
Filter blocked or not completely dry (worded 'please check that the filter is dry or clean the filter' on E-series and earlier models; newer Q5+/S7 manuals list the same fault without a number as 'Filter blocked or wet'). A wet or clogged filter restricts airflow.
Likely causes
- Filter still wet after washing
- Filter clogged with dust and fine debris
- Filter worn out and no longer clearing with cleaning
How to fix it — step by step
- Remove the filter and tap it clean against a bin
- If it was washed, leave it to dry completely for at least 24 hours before refitting
- Refit the dry filter and dustbin correctly
- Restart cleaning, and replace the filter if the error keeps returning
Parts that commonly fix it
- filter - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.