Trane Furnace E05 Error Code

What the E05 code means

On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E05 means flame was detected when it should not be present — a flame signal exists while the gas valve should be closed.

Likely causes

  1. Gas valve leaking or stuck open
  2. Shorted flame sensor wiring
  3. Failed control board

How to fix it — step by step

  1. Turn furnace power off and close the gas shutoff to the furnace
  2. Do not keep resetting the furnace
  3. If you smell gas, leave the house and call the gas utility
  4. Call a technician to test the gas valve and flame-sense circuit

Parts that commonly fix the E05 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace error codes

See all Trane furnace codes & guides →