Trane Furnace E3.1 Error Code
What the E3.1 code means
On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E3.1 means the first-stage pressure switch is shorted (closed when it should be open, before the inducer runs).
Likely causes
- Pressure switch stuck closed
- Water or debris in the pressure switch or hose
- Shorted pressure switch wiring
How to fix it — step by step
- Check outdoor vent terminations for blockages
- Check the condensate drain for clogs
- Reset power once and note if the code returns before the inducer starts
- Call a technician to test or replace the pressure switch
Parts that commonly fix the E3.1 code
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.