Trane Furnace E12 Error Code

What the E12 code means

On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E12 means an open fuse — the low-voltage fuse on the control board has blown, so the control has no power.

Likely causes

  1. Blown board fuse from a low-voltage short
  2. Shorted thermostat wiring
  3. Failed transformer

How to fix it — step by step

  1. Check the breaker and furnace switch first
  2. Make sure the blower door is fully seated
  3. Do not replace the board fuse repeatedly — a fuse that blows again means a short
  4. Call a technician to find the short and replace the fuse or transformer

Parts that commonly fix the E12 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace error codes

See all Trane furnace codes & guides →