Trane Furnace E3.4 Error Code
What the E3.4 code means
On two-stage Trane S-series furnaces with a seven-segment display (S9X2, S8X2), code E3.4 means the second-stage pressure switch is open — second-stage draft was not proved. It does not apply to single-stage S9X1/S9B1/S8X1 models.
Likely causes
- Blocked vent or intake at high fire
- Clogged condensate drain
- Weak inducer at second stage
- Failed second-stage pressure switch
How to fix it — step by step
- Clear the outdoor vent and intake terminations
- Check the condensate drain for clogs or freezing
- Reset power once and observe whether the fault occurs only on high heat demand
- Call a technician to test the second-stage pressure switch and inducer
Parts that commonly fix the E3.4 code
- pressure switch - Shop at RepairClinic
- inducer motor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.