Bosch Washer E20 Error Code

What the E20 code means

Unexpected heating — the washer is heating water when it should not be, for example during a rinse or a cold programme.

Likely causes

  1. Faulty temperature (NTC) sensor giving a wrong reading
  2. Stuck heating relay on the control board
  3. Control board fault

How to fix it — step by step

  1. Stop the programme and unplug the washer
  2. Leave it unplugged for a few minutes, then plug back in to reset, as Bosch advises
  3. Run a cold programme and check whether the water or laundry feels warm when it should not
  4. If the code returns or the water heats uncommanded, unplug the washer and call a technician

Parts that commonly fix the E20 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch washer error codes

See all Bosch washer codes & guides →