Bosch Washer F27 Error Code
What the F27 code means
The pressure sensor is faulty — the washer cannot reliably measure the water level in the drum. Bosch states this fault cannot be rectified by the user. It is also shown as E27 on some models.
Likely causes
- Failed pressure sensor
- Blocked pressure sensor hose or air chamber
- Wiring fault to the sensor
How to fix it — step by step
- Unplug the washer for a few minutes, then restore power and restart to rule out a glitch
- Make sure the washer drains completely and clean the pump filter if needed
- If F27 returns, book a technician
Parts that commonly fix the F27 code
- pressure sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.