Bosch Washer E23 Error Code
What the E23 code means
The AquaStop leak-protection system has been activated, which usually means water has leaked into the base of the washer. Bosch states this fault cannot be rectified by the user.
Likely causes
- Leaking inlet or AquaStop hose
- Leaking door seal
- Leaking drain pump or internal hose
- Overfilling from a faulty inlet valve
How to fix it — step by step
- Turn off the water tap immediately
- Unplug the washer and do not run it again until it has been checked
- Mop up any water on the floor and check the visible hose connections at the back for drips
- Book a technician to find and repair the leak
Parts that commonly fix the E23 code
- AquaStop inlet hose - Shop at RepairClinic
- door seal - Shop at RepairClinic
- drain pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.