Bosch Washer E26 Error Code

What the E26 code means

The analogue pressure sensor is faulty — the sensor that measures the water level in the drum is not working. Bosch states this fault cannot be rectified by the user.

Likely causes

  1. Failed analogue pressure sensor
  2. Blocked pressure sensor hose or air chamber
  3. Wiring fault to the sensor

How to fix it — step by step

  1. Unplug the washer for a few minutes, then restore power and try restarting the programme
  2. Check the washer drains fully (clean the pump filter if it does not), since a level fault can follow a drain problem
  3. If E26 returns, book a technician — the sensor and its air hose are internal

Parts that commonly fix the E26 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch washer error codes

See all Bosch washer codes & guides →