Rheem Furnace 0 Error Code
What the 0 code means
Standby on Rheem furnaces with the 7-segment diagnostic display (including R95P models). This is a normal status, not a fault — the furnace is powered and waiting for a thermostat call.
Likely causes
- no call for heat from the thermostat
- thermostat set to Off or satisfied
How to fix it — step by step
- Check the thermostat is set to Heat and above room temperature
- Check thermostat batteries if fitted
- Check the furnace power switch and breaker are on
- If there is a heat call and the display still shows 0, call a technician
Parts that commonly fix the 0 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.