Rheem Furnace 3 blinks

What this problem usually means

Limit circuit open on older Rheem/Ruud furnaces with the blinking status LED board. The furnace overheated, or the manual-reset rollout switch above the burners tripped.

Likely causes

  1. dirty filter or closed registers restricting airflow
  2. tripped rollout switch
  3. blower problem

How to fix it — step by step

  1. Turn the thermostat down and let the furnace cool
  2. Replace the air filter if it is dirty or clogged
  3. Open all supply registers and make sure return vents are not blocked by furniture
  4. Restore the heat call and watch whether the code returns
  5. If the limit code repeats, stop and call a licensed HVAC technician

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Rheem furnace problems

See all Rheem furnace codes & guides →