Payne Furnace 26.1 Error Code

What the 26.1 code means

Loose factory wiring on Payne furnaces with a 3-digit status display. The LED flashes major code 26 while the display reads 26.1: a jumper in the factory wiring harness is loose or disconnected.

Likely causes

  1. Jumper in the factory wiring harness is loose
  2. Jumper in the factory wiring harness is disconnected

How to fix it — step by step

  1. Note the code for the technician
  2. Do not open the control compartment to reseat harness jumpers yourself
  3. Turn the furnace off at the service switch if it will not run
  4. Call a technician to inspect and reseat the factory wiring harness

Parts that commonly fix the 26.1 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Payne furnace error codes

See all Payne furnace codes & guides →