OBD-II Car P0456 Error Code

What the P0456 code means

Evaporative Emission System Leak Detected (Very Small Leak): the computer's pressure test on the sealed EVAP system - monitored through the fuel tank pressure sensor - found a leak even smaller than P0442's. Per the ASE-authored reference, an incorrect or faulty gas cap is the usual cause; refuelling with the engine running or a cap left undertightened can also set it. No symptoms other than the light.

Likely causes

  1. Faulty, incorrect, or undertightened gas cap (usual cause)
  2. Small leak in an EVAP hose or fuel tank hose
  3. Small leak past the purge valve or vent valve seals
  4. Leaking EVAP charcoal canister

How to fix it — step by step

  1. Remove and refit the gas cap until it clicks, clear the code, and drive several trips - if the cap's seal looks cracked or flattened, replace it with an OEM cap
  2. Inspect all EVAP and fuel tank hoses for hairline cracks, especially at bends and clamps
  3. With a scan tool, command the vent solenoid closed and watch the fuel tank pressure sensor: a system that can't hold a steady reading is leaking
  4. Have a smoke test performed to pinpoint the leak - watch for smoke at any EVAP component; that component is the faulty one
  5. Never pressurise the EVAP system with shop air to find the leak - it can damage the purge and vent solenoids

Parts that commonly fix the P0456 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related OBD-II car error codes

See all OBD-II car codes & guides →