OBD-II Car P0174 Error Code

What the P0174 code means

System Too Lean (Bank 2): the same lean condition as P0171, but reported by the upstream oxygen sensor on bank 2 (the side of a V-engine without cylinder #1). If P0171 and P0174 appear together, the cause is almost always something shared by both banks - the MAF sensor, a central vacuum leak, or fuel delivery - rather than two separate bank faults.

Likely causes

  1. Dirty or faulty mass airflow (MAF) sensor under-reporting airflow
  2. Vacuum leak downstream of the MAF sensor - cracked hoses, PCV plumbing, or intake manifold gaskets
  3. Low fuel pressure from a clogged fuel filter, weak pump, or faulty regulator
  4. Clogged or failing fuel injector(s) on bank 2
  5. Faulty bank 2 upstream oxygen sensor (less common - test before replacing)

How to fix it — step by step

  1. Check whether P0171 is stored too - both banks lean means start with the MAF sensor, intake leaks, and fuel pressure, not bank-specific parts
  2. Clean the MAF sensor with MAF cleaner and inspect the intake tract and all vacuum/PCV hoses for leaks
  3. Watch fuel trims on a scan tool: high positive trims at idle that fall with RPM indicate a vacuum leak; trims rising with load indicate fuel starvation or a bad MAF reading
  4. Verify fuel pressure meets spec under load
  5. Replace the oxygen sensor only if its live switching can be shown to be false after the above checks

Parts that commonly fix the P0174 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related OBD-II car error codes

See all OBD-II car codes & guides →