OBD-II Car P0700 Error Code

What the P0700 code means

Transmission Control System Malfunction: this is an informational code only. The transmission control module (TCM) has detected a fault in the automatic transmission and stored its own code, and it asked the engine computer to turn on the check engine light - P0700 is just the messenger. It does not tell you what's wrong with the transmission; the real code lives in the TCM and needs a scan tool that can talk to the transmission module. The transmission may also go into a reduced-gear "limp mode" to protect itself.

Likely causes

  1. A genuine transmission fault stored in the TCM - anything from a shift solenoid or speed sensor to internal wear (this is the overwhelming majority)
  2. Low or degraded automatic transmission fluid causing the underlying fault
  3. Failed TCM (possible but uncommon)
  4. Failed PCM (unlikely)

How to fix it — step by step

  1. Do not just clear this code - first read the transmission codes from the TCM with a transmission-capable scan tool; a basic engine code reader usually can't, so a parts-store scan or shop visit may be needed
  2. Check the transmission fluid level (if your car has a dipstick) and its condition - dark, burnt-smelling fluid is evidence, not something to hide with a flush before diagnosis
  3. Write down the TCM code(s) - they determine the repair, e.g. a solenoid code is very different from a gear-ratio code
  4. If the scan tool can't communicate with the TCM at all, suspect the TCM or its power/ground feeds
  5. Take the car and the TCM codes to a transmission specialist - internal transmission diagnosis and repair is not a driveway job

Parts that commonly fix the P0700 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related OBD-II car error codes

See all OBD-II car codes & guides →