OBD-II Car P0011 Error Code

What the P0011 code means

"A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1): the variable valve timing (VVT) system on bank 1's intake camshaft is more advanced than the engine computer (PCM) commanded, or the system isn't responding as expected. The cam timing is controlled by oil pressure through a solenoid, so oil problems and solenoid faults are common culprits.

Likely causes

  1. Failed or stuck-open VVT solenoid (oil control valve) for bank 1
  2. Sludged, low, or wrong-viscosity engine oil starving the VVT system
  3. Incorrect camshaft timing - stretched timing chain or a belt/chain that has jumped a tooth
  4. Wiring or connector fault in the VVT solenoid circuit
  5. Continuous oil flow to the VVT phaser (cam gear) chamber from a failed phaser

How to fix it — step by step

  1. Check the engine oil level and condition first - low or overdue oil is a very common trigger; change the oil and filter with the correct viscosity if it's due
  2. Inspect the bank 1 intake VVT solenoid connector and wiring for damage, oil intrusion, or corrosion
  3. Test the VVT solenoid (resistance and whether it clicks/moves when powered) and replace it if it fails the test - this is the most common parts fix
  4. Clear the code and road test; if P0011 returns with a good solenoid and clean oil, have the cam timing and timing chain checked - that is shop-level work

Parts that commonly fix the P0011 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related OBD-II car error codes

See all OBD-II car codes & guides →