Kenmore Washer tE Error Code

What the tE code means

Heating sensor (thermistor) error on Kenmore 796-series (LG-built) front-load washers: the water temperature sensor reading is out of range.

Likely causes

  1. Failed thermistor
  2. Loose or damaged thermistor wiring
  3. Control board fault

How to fix it — step by step

  1. Unplug the washer and restart a cycle to see if tE clears
  2. Do not keep running heated cycles if tE returns immediately
  3. Have the thermistor and its wiring tested with a multimeter
  4. Replace the thermistor if its resistance is out of range

Parts that commonly fix the tE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →