Kenmore Washer F21 Error Code

What the F21 code means

Long drain on Kenmore 110-series (Whirlpool-built) high-efficiency front-load washers: drain time exceeds about 8 minutes and the water valves turn off. This is a different platform from the 796 letter codes, where slow drain shows as OE.

Likely causes

  1. Drain hose kinked, frozen or clogged
  2. Drain hose raised more than 96 inches or sealed into the standpipe
  3. Clogged drain pump filter
  4. Failed drain pump

How to fix it — step by step

  1. Select PAUSE/CANCEL twice and unplug the washer
  2. Check the drain hose is not kinked, frozen or clogged and is installed correctly
  3. Clean the drain pump filter behind the lower front panel
  4. Reconnect power and restart; replace the drain pump if it does not run

Parts that commonly fix the F21 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →