Kenmore Washer IE Error Code

What the IE code means

Inlet water supply error on Kenmore 796-series (LG-built) front-load washers: the expected water level is not reached in 8 minutes, or the preset level is not reached in 25 minutes.

Likely causes

  1. Water supply faucets closed or partly open
  2. Kinked inlet hoses or clogged inlet screens
  3. Low water pressure
  4. Failed inlet water valve assembly

How to fix it — step by step

  1. Make sure both water supply faucets are fully open
  2. Straighten the inlet hoses and clean the inlet screens
  3. Check that house water pressure is adequate
  4. Restart the cycle; if IE returns with good supply, the inlet valve assembly or control board needs service

Parts that commonly fix the IE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →