Kenmore Washer F33 Error Code
What the F33 code means
Pump drive system error on Kenmore 110-series (Whirlpool-built) high-efficiency washers: the connection between the drain pump and the Central Control Unit (CCU) is lost.
Likely causes
- Loose wire harness connection at the pump or control board
- Damaged pump wiring
- Failed drain pump
- Failed central control unit
How to fix it — step by step
- Unplug the washer or disconnect power
- Check the wire harness connections to the pump and to the Central Control Unit and reseat any loose plugs
- Plug in and run a diagnostic test or any cycle to verify operation
- Call a technician if F33 returns, as the pump or control board needs testing
Parts that commonly fix the F33 code
- drain pump - Shop at RepairClinic
- main control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.