York Furnace Slow amber flash

What this problem usually means

Normal operation with a call for heat on York furnaces with the red/green/amber LED control (including PT9 series). The furnace is running a normal heating cycle.

Likely causes

  1. normal heat call in progress

How to fix it — step by step

  1. No action is needed — the furnace is heating normally
  2. If rooms are not warming, check the filter and that registers are open

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related York furnace problems

See all York furnace codes & guides →