York Furnace Steady on red

What this problem usually means

Control failure on York furnaces with the red/green/amber LED control. If the failure is internal to the control, the light stays on continuously and the manual says the entire control should be replaced.

Likely causes

  1. failed control board
  2. internal control fault

How to fix it — step by step

  1. Turn power off at the furnace switch for 30 seconds, then back on
  2. Try one heat call and note whether the LED stays steady on
  3. Do not keep cycling power if it stays on
  4. Call a licensed HVAC technician — the control is not field repairable

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related York furnace problems

See all York furnace codes & guides →