York Furnace 4 amber flashes
What this problem usually means
The control board is receiving a Y (cooling) signal from the thermostat without a G (fan) signal on York furnaces with the red/green/amber LED control, indicating improper thermostat wiring.
Likely causes
- thermostat wiring error
- missing G wire connection
How to fix it — step by step
- Check the thermostat is set to Heat, not Cool, if you are calling for heat
- Note the pattern for the technician
- Do not rewire the thermostat unless you are confident and power is off
- Call a technician if the wiring needs correction
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.