Whirlpool Dishwasher F3 E3 Error Code

What the F3 E3 code means

The OWI (optical water indicator) sensor failed to calibrate during the cycle.

Likely causes

  1. Failed or dirty OWI sensor
  2. Failed drain hose check valve letting water backflow into the tub
  3. Defective sensor wiring harness

How to fix it — step by step

  1. Clean the filters and make sure dirty water is draining away fully
  2. Check the drain hose is not letting sink water run back into the dishwasher
  3. Cut power for 1 minute, restore it, and run a cycle
  4. If the code returns, schedule service for the sensor / check valve

Parts that commonly fix the F3 E3 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →