Whirlpool Dishwasher F6 E7 Error Code

What the F6 E7 code means

A flow meter error: the control is not getting a correct fill signal from the flow meter (not all models have one).

Likely causes

  1. Failed flow meter / reed switch
  2. Corroded or loose flow meter wiring
  3. Low water pressure or a clogged inlet valve

How to fix it — step by step

  1. Make sure the supply valve is fully open and the hose is not kinked
  2. Cut power for 1 minute, restore it, and run a cycle
  3. If the code returns, schedule service - the flow meter usually needs replacement

Parts that commonly fix the F6 E7 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dishwasher error codes

See all Whirlpool dishwasher codes & guides →