Shark Robot vacuum CLEAN (RED) + DOCK (BLUE) flashing
What this problem usually means
Error number 7 in Shark IQ manuals (shown with DOCK white instead of blue on some newer models): cliff sensor error. The drop sensors are dirty or are reading a drop.
Likely causes
- Cliff sensors dirty or dusty
- Robot too close to stairs or an edge
- Dark flooring triggering the cliff sensors
How to fix it — step by step
- Move the robot to a new location away from stairs and edges
- Wipe the cliff sensors on the underside with a clean, dry cloth
- Place the robot on a level floor
- Restart cleaning
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Related Shark robot vacuum problems
- CLEAN (RED) + DOCK (RED) + ! (RED) flashing
- CLEAN (RED) + DOCK (RED) flashing
- CLEAN (RED) flashing
- CLEAN (WHITE) + DOCK (RED) + ! (RED) flashing
- DOCK (RED) + ! (RED) flashing
- DOCK (RED) flashing
- ALL LED LIGHTS are off
- BATTERY ICON (RED) flashing
- CLEAN (BLUE) + ! (RED) flashing
- CLEAN (BLUE) + DOCK (RED) flashing
- CLEAN (BLUE) + DOCK (RED) solid
- CLEAN (RED) + ! (RED) flashing