Shark Robot vacuum CLEAN (RED) + DOCK (RED) + ! (RED) flashing
What this problem usually means
Error number 2 in Shark IQ manuals: a drive wheel is stuck (some IQ manuals word the same pattern as the robot being stuck and to check the bumper). Shown by CLEAN, DOCK and ! all flashing red.
Likely causes
- Hair or debris wrapped around a drive wheel or its axle
- Wheel jammed by an object
- Robot wedged so a wheel cannot turn
How to fix it — step by step
- Turn the robot over and clean the wheels
- Remove any debris wrapped around the wheel axles so the wheels move freely
- Check the front bumper moves in and out freely
- Move the robot to a new location and restart cleaning
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Related Shark robot vacuum problems
- CLEAN (RED) + DOCK (RED) flashing
- CLEAN (RED) flashing
- CLEAN (WHITE) + DOCK (RED) + ! (RED) flashing
- DOCK (RED) + ! (RED) flashing
- DOCK (RED) flashing
- ALL LED LIGHTS are off
- BATTERY ICON (RED) flashing
- CLEAN (BLUE) + ! (RED) flashing
- CLEAN (BLUE) + DOCK (RED) flashing
- CLEAN (BLUE) + DOCK (RED) solid
- CLEAN (RED) + ! (RED) flashing
- CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing