Shark Robot vacuum CLEAN (BLUE) + ! (RED) flashing

What this problem usually means

Error number 2 in Shark IQ manuals: blockage in the brushroll. Shown by CLEAN blue and ! red flashing (some models show the brushroll blockage with CLEAN red + ! alternating instead).

Likely causes

  1. Hair, string or carpet fibres wrapped around the brushroll
  2. Object jammed in the brushroll housing
  3. Brushroll end caps clogged with debris

How to fix it — step by step

  1. Turn the robot off and turn it over
  2. Remove the brushroll and pull off all hair and debris from around and inside it
  3. Clear the brushroll housing and end caps, then refit the brushroll
  4. Restart cleaning

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Shark robot vacuum problems

See all Shark robot vacuum codes & guides →