Maytag Dryer F3 E3 Error Code

What the F3 E3 code means

Inlet thermistor failure: the sensor that reads incoming air temperature has failed.

Likely causes

  1. Inlet thermistor defective
  2. Loose or damaged inlet thermistor wiring
  3. Electronic control board fault

How to fix it — step by step

  1. Unplug the dryer and check the inlet thermistor wiring, reconnecting any loose wires
  2. Replace a damaged wire harness
  3. Test or replace the inlet thermistor if its resistance is out of range
  4. If the thermistor and wiring are fine, call for service for the electronic control board

Parts that commonly fix the F3 E3 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Maytag dryer error codes

See all Maytag dryer codes & guides →