Maytag Dryer F3 E1 Error Code

What the F3 E1 code means

Exhaust thermistor failure: the sensor that reads exhaust temperature has failed or its signal is out of range.

Likely causes

  1. Exhaust thermistor defective (should measure about 10,000 ohms at room temperature)
  2. Loose or damaged thermistor wiring
  3. Electronic control board fault

How to fix it — step by step

  1. Unplug the dryer and check the exhaust thermistor wiring, reconnecting any loose wires
  2. Replace a damaged wire harness
  3. Test or replace the exhaust thermistor if its resistance is out of range
  4. If the thermistor and wiring are fine, call for service for the electronic control board

Parts that commonly fix the F3 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Maytag dryer error codes

See all Maytag dryer codes & guides →