LG Washer FE Error Code
What the FE code means
Overfill error: too much water was supplied and the water level rose above the safe maximum.
Likely causes
- Too much detergent or non-HE detergent causing excess suds that fool the level sensor
- Clogged hose to the water level sensor
- Clogged drain filter keeping the level high
- Water inlet valve stuck open
How to fix it — step by step
- Turn off both water taps and unplug the washer
- Use less HE detergent, in the recommended amount, on the next cycle
- Drain the excess water and clean the drain pump filter (see OE steps, with a pan ready for a large amount of water)
- Run a short test cycle and watch the fill level; if it keeps filling with power off, leave the taps off and book service
Parts that commonly fix the FE code
- water inlet valve - Shop at RepairClinic
- water level pressure sensor - Shop at RepairClinic
- pressure sensor hose - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.