LG Washer AE Error Code
What the AE code means
Rotation error on top-load models: the gears responsible for rotating the drum cannot operate properly. On some front-load models AE is also used for a leak detected in the base.
Likely causes
- Coin or foreign object trapped between the wash plate and drum interfering with the gear or motor
- Motor / gear fault
- On front-load models, water leaking into the base pan
How to fix it — step by step
- Unplug the washer and, on top-load models, check between the wash plate and drum for trapped coins or objects, removing them with tweezers
- On front-load models, turn off both water taps and check hose connections and the door seal for drips
- Plug back in and run a short test cycle
- If there is no trapped object but noise continues or the drum will not rotate, book service
Parts that commonly fix the AE code
- drive motor - Shop at RepairClinic
- leak sensor - Shop at RepairClinic
- door gasket - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.