LG Washer Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 21 codes covered.
Shop LG Washer parts at RepairClinic
- AE — Rotation error on top-load models: the gears responsible for rotating the drum cannot operate properly. On some front-load models AE is…
- CE — Current error: the motor control component is damaged or drawing excess current. LG states this cannot be resolved with basic…
- CL — Child lock / control lock is active - this is not an error. The control panel is locked (except the power button) to prevent accidental…
- dE — Door error: the washer door or lid is not closed properly or is not locking, so the cycle pauses.
- dE1 — Door error on front-load models: the door is not closed properly, for example because laundry is caught between the door and the gasket.
- dE2 — Door error on front-load models: the door is closed but did not lock, so the washer will not start or continue.
- dE4 — Door error grouped by LG with dE1/dE2: the washer cannot confirm the door is properly closed and locked and pauses operation.
- dL — Door not locked error on top-load models: the lid is not seen as closed and locked.
- E3 — Drain motor error on top-load models: there is a problem with the operation of the drain motor.
- FE — Overfill error: too much water was supplied and the water level rose above the safe maximum.
- FF — Freeze failure: water in the supply or drain hoses, or in the drain pump, has frozen in cold weather so the washer cannot fill or drain.
- IE — Inlet error: the washer did not fill with enough water in the time allowed, so the cycle stops.
- LE — Motor locked error: the tub fails to spin because the motor cannot operate or turn the drum.
- LE1 — Motor stuck error on top-load models: the motor cannot rotate the drum, often because something is trapped between the wash plate and the…
- OE — Outlet / drain error: the washer cannot drain the water from the tub, or drains too slowly.
- PE — Pressure sensor error: the water level (pressure) sensor cannot measure the water level in the tub.
- PF — Power failure: power to the washer was cut during a cycle. This is a notification, not a fault - the washer remembers the last operation…
- tCL — Tub Clean reminder - this is not an error. The washer is reminding you to run the Tub Clean cycle to remove residue and microorganisms from…
- tE — Temperature sensor (thermistor) error: the washer detects a fault with the water temperature sensing / heating control.
- UE — Unbalance error: the load stayed unbalanced even after the washer tried to redistribute it, so it will not spin properly. A lowercase uE is…
- vS — Vibration sensor error (also displayed as u5 or uS): the washer detects a problem with its vibration sensor, possibly a contact issue or a…