Lennox Furnace E271 Error Code

What the E271 code means

On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E271 is a Watchguard soft lockout — the low pressure switch opened repeatedly (five pressure-switch trips in one call for heat).

Likely causes

  1. Blocked vent or intake
  2. Frozen or clogged condensate drain
  3. Failing inducer or pressure switch

How to fix it — step by step

  1. Clear the outdoor vent and intake terminations
  2. Check and clear the condensate drain if you can see a clog
  3. Wait out the Watchguard or reset power once
  4. Call a technician if it repeats, to test draft, the inducer and the switch

Parts that commonly fix the E271 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Lennox furnace error codes

See all Lennox furnace codes & guides →