Kenmore Dryer F:23 Error Code

What the F:23 code means

Outlet thermistor failure, shorted circuit, on Kenmore Elite dryers (110-series Whirlpool-built platform): the control detects an electrically shorted outlet (exhaust) temperature sensor.

Likely causes

  1. Shorted outlet thermistor
  2. Pinched or damaged thermistor wiring causing a short
  3. Control board fault if sensor and wiring test good

How to fix it — step by step

  1. Unplug the dryer before any check
  2. Inspect the thermistor wiring for pinching or damage
  3. Test the thermistor resistance; it should be about 10,000 ohms at room temperature
  4. Replace the outlet thermistor if its resistance is out of range

Parts that commonly fix the F:23 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →