Kenmore Dryer d80 Error Code
What the d80 code means
Exhaust vent about 80% blocked on Kenmore 796-series (LG-built) dryers: the CHECK VENT system has detected a restriction in the external venting. The code is only displayed for about 2 hours and is a warning, not a dryer failure.
Likely causes
- Lint buildup partially blocking the ductwork
- Vent run too long or with too many turns
- Blocked outside vent hood
- Clogged lint screen
How to fix it — step by step
- Clean the lint screen
- Clean lint from the entire vent run and outside hood
- Check the vent run is not crushed, too long or full of sharp turns
- Run an empty test cycle and check strong airflow outside
Parts that commonly fix the d80 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.