Kenmore Dryer d95 Error Code

What the d95 code means

Exhaust vent about 95% blocked on Kenmore 796-series (LG-built) dryers: the ductwork is almost completely blocked, which is a fire risk. The code is only displayed for about 2 hours.

Likely causes

  1. Severe lint blockage in the ductwork
  2. Blocked house exhaust system
  3. Vent run too long or with too many restrictions

How to fix it — step by step

  1. Do not use the dryer until the exhaust system is cleaned or repaired
  2. Clean the lint screen and the full vent run, including the outside hood
  3. Shorten or straighten the vent run if it is too long or has too many turns
  4. Confirm strong airflow outside on a test cycle before drying clothes again

Parts that commonly fix the d95 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore dryer error codes

See all Kenmore dryer codes & guides →