Kenmore Dryer d90 Error Code
What the d90 code means
Exhaust vent about 90% blocked on Kenmore 796-series (LG-built) dryers: the ductwork is severely restricted, drying will be slow and the dryer runs hot. Do not keep using the dryer until the vent is cleaned.
Likely causes
- Heavy lint blockage in the ductwork
- Crushed or kinked vent
- Blocked outside vent hood
- Vent run too long or with too many turns
How to fix it — step by step
- Stop using the dryer until the vent is checked
- Clean the lint screen and the entire vent run
- Straighten or replace any crushed vent section and clear the outside hood
- Run a test cycle and confirm strong airflow outside before normal use
Parts that commonly fix the d90 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.