Hayward Pool heater HS Error Code
What the HS code means
On Hayward Universal H-Series gas pool heaters, HS means the maximum return water temperature was exceeded and/or the water temperature rose too rapidly, often a low-flow warning.
Likely causes
- low water flow through the heater
- dirty filter or closed valves
- water temperature sensor fault
- internal bypass fault
How to fix it — step by step
- Turn the heater off and let the water cool
- Make sure the pump is running, the filter is clean or backwashed, and valves to the heater are fully open
- Check skimmer and pump baskets and clear debris
- Restart once with full flow and watch for HS returning
- If HS returns with good flow, call a pool/spa technician
Parts that commonly fix the HS code
- temperature sensor - Shop at RepairClinic
- water pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.