Hayward Pool heater LP Error Code

What the LP code means

On Hayward HeatPro heat pump pool heaters, LP indicates low refrigerant pressure, which can be caused by loss of refrigerant, fan motor failure, evaporator freeze-up, airflow blockage, or outside air that is too cold (usually below about 45-55F).

Likely causes

  1. low outside air temperature
  2. airflow blockage or dirty evaporator coil
  3. fan motor failure
  4. loss of refrigerant

How to fix it — step by step

  1. Check the outside temperature - if it is cold, wait for warmer air and let any coil frost melt with power off
  2. Clear leaves and debris from around and on the evaporator coil without bending fins
  3. Make sure the fan can spin freely and the unit has clear airflow
  4. Restart once after conditions improve
  5. If LP returns in mild weather, call a technician - do not add refrigerant yourself

Parts that commonly fix the LP code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Hayward pool heater error codes

See all Hayward pool heater codes & guides →